top of page

Here we have a wonderful example of a 1960 Longines Conquest, reference 9020-2, with the tropicalised rail track dial. It has the 35mm stainless steel case with the straight lug design. The screw back has the famous enamel ‘fish in kelp’ medallion to the centre, with the vibrant green tone. To the right-hand side is the original scalloped crown which catches the eye. The dial was originally silver, but has developed the most wonderful spotted, caramelised tropical patination. It has the standout applied hour markers with the textured rail track design. There are luminous plots to the quarters which have the aged tone. The Longines name is signed below 12 with the applied logo. The Conquest 3-star signing is above 6. It has the correct original hand set for the reference. The serial to the back of the lug matches the serial inside of the case. The movement is the Longines cal 290 movement which is automatic. It has been recently serviced and is keeping accurate time. The watch is paired with a stylish light grey Suede fronted racing style strap, with quick release spring bars.

 

The Conquest

The Longines Conquest line has a history spanning over 70 years and represents the pinnacle of the brands sporty yet elegant collections.

It was first developed in the early 1950s with the line officially launching as the Conquest in 1954. It was the first Longines model line to have its name trademarked, creating a distinct identity. The ref 9001 which was the debut model, featured an in-house self-winding movement with the champleve enamel medallion inlaid into the case back. The steel models have the fish in kelp design, with the gold models having a constellation of stars on blue enamel.

Personally, we prefer the reference 9020, its siblings and the complex reference 9028 (with its power reserve).

 

This example

This Longines Conquest captures the golden era of mid-century Swiss horology, prior to the quartz crisis. An uncompromising approach to quality with Longines in-house manufacturing, combined with clean design, offering a sports-chic elegance.

 

The dial is the centre piece of the watch naturally, but this example has such an appealing patination that you can’t fail but bask in its beauty. The natural silver base tone has the linear brushed finish and has developed a wonderful, even, caramel tone patination which radiates a warm glow. The patina has paid attention to the watches design with the bulk of the spotting located to the centre, contained within the rail track chapter ring. The outer section has the dash markers for the minutes/seconds with the applied hour markers bridging the outer section, chapter ring and inner sector. The hour markers provide an eye-catching texture to the dial, with the elongated baton markers having the bevelled edges and score to the centre. There is a balance to its layout with the quarters having the differentiated coffin shaped markers with the facetted edges and centre. To the base of each are the rectangular luminous plots, which have developed an aged tone. The rail track chapter ring is a standout feature on the dial, creating a unique sectored approach and an eye-catching piece of design. Below 12 is the Longines name with the applied winger hourglass logo. Above 6 is the Conquest name with three stars and the ‘automatic’ text. To the base of the dial is the ‘Swiss Made’ text.

 

The case measures 35mm wide with a total width of 36.8mm with crown. It has a total lug-to-lug measurement of 43mm which increases the presence on the wrist. It has a well sized 18mm lug width, allowing a wide choice of straps.

 

The front of the case is designed to maximise the dials impact, with a thin polished section surrounding the dial with a neat, bevelled edge. The lugs are the clean, straight design with the facetted sides. The sides of the case have the shallow flat section, before scalloping inwards towards the back. To the right-hand side is the famed original scalloped crown design, signed with the Longines name and winged hourglass logo. The case back has 6 notches and screws in place. It has the dished design with the bevelled edge and the polished finish. To the centre is the applied medallion with the golden fish, engulfed in the green kelp. It has the ‘Longines’ name to the exterior with the ‘Automatic-Waterproof’ text. The rear of the lug has the number ‘746’ which corresponds with the number inside of the case. Inside it has the Longines logo with the reference ‘9020-2’.

 

The movement is the Longines calibre 290 which is a quality automatic movement, produced in house. It has a jewel count of 24 and operates at a frequency of 19,800 BPH. It has been recently serviced and is keeping accurate time to within 10 seconds variation per day.

 

The watch is paired with a stylish light grey Suede fronted racing style strap, with the black leather back. It has the quick release spring bars, allowing easy change.

 

The watch is modelled on a 7” wrist circumference.

Full condition report below. Please see the images as these compliment and aid the description provided below.

 

Dial: 

The dial is original and has developed a warm patina with age. It has clear signing and the hour markers have a bright silver tone with no noticeable corrosion.  

 

Hands: 

The hands are original and are in good condition with no bending. They have a light spotted tarnishing associated with age. The central second hand is also good and original.  

 

Glass: 

The acrylic crystal appears original and is in good condition with some light marking, mainly to the edges.

 

Crown:

The crown is original and is in good condition with some light scratching.  

 

Case:

The case is in strong, unpolished condition. It has light surface scratching associated with age.

 

Caseback:

The steel case back is in good condition with the medallion being particularly clean with no loss of green tone.

 

Strap: 

The watch comes on new strap which will fit any wrist.

 

Movement: 

The movement is the Longines calibre 290 which is a quality automatic movement, produced in house. It has a jewel count of 24 and operates at a frequency of 19,800 BPH. It has been recently serviced and is keeping accurate time to within 10 seconds variation per day, with a strong amplitude of 300 degrees and a beat error of 0.3 m/s.

 

Case dimensions:

Case width: 35mm

Case width with crown: 36.8mm

Case length: 35mm

Case length lug to lug: 43mm

Case Depth: 11.5mm

Lug width: 18mm

1960 Longines Conquest Automatic ref 9020-2 Tropicalised rail track dial cal 290

£1,450.00Price
Quantity
      bottom of page